Detroit Public Schools.
"Mechanical Drawing[:] Standards and Conventions" (1922)
Contents
- Introduction
- Cover
- Inside
Cover Author
- P. 1
Title Page
- P. 2
Copyright Page
- P. 3 Preface
- P. 4
Preface to First Edition
- P. 5
Preface to First Issue
- P. 6
Plate 1 - Standard Sizes of US Sheets
- P. 7
General Directions and Notes
- P. 8
Plate 2 - D-Size Sheet Borders and Cutting Lines
- P. 9
Directions for Laying Out D-Size Sheets
- P. 10
Plate 3 - C-Size Sheet Borders and Cutting Lines
- P. 11
Directions for Laying Out C-Size Sheets
- P. 12
Plate 4 - Title Blocks
- P. 13
Standards and Conventions
- P. 14
Plate 5 - Dimensions for Bill of Material
- P. 15
Conventional Lines
- P. 16
Plate 6 - Lettering & Conventional Lines
- P. 17
Working Drawings
- P. 18
Plate 7 - Views
- P. 19
Plate 8
- P. 20
Assembly Drawings
- P. 21
Plate 9
- P. 22
Dimensions
- P. 23
Plate 10 - Dimensions
- P. 24
- P. 25
Plate 11 - Dimensioned Pillow Block
- P. 26
[Concerning] Notes; Section Views
- P. 27
Plate 12 - Spur Gear
- P. 28
Plate 13 - Screw Threads
- P. 29
Plate 14 - Thread Sections & Tapped Holes
- P. 30
Threads
- P. 31
Plate 15 - US Standard Bolts
- P. 32
Plate 16 - Machine Screw Heads
- P. 33
Plate 17 - Set Screws, Rivets, Briggs Pipe Threads
- P. 34
Plate 18 - Limits [Tolerances], Centers
- P. 35
Limits; Pattern and Forging Drawings
- P. 36
Plate 19 - Piano Bench
- P. 37
Plate 20 - Conventional Cross Sections [Materials] and Breaks
- P. 38
Plate 21 - Decimal Equivalents of Fractional Parts of One Inch
- P. 39
Plate 22 - US Standard Threads Bolts and Nuts [Dimensions]
- P. 40
Appendix: Rapid Drafting, Precautions for Neatness;
Table of Scales
- P. 41
Inking
- P. 42
- P. 43
Tracing
- P. 44
Checking Drawings
Introduction
This is a reprint of
Frank R. Kepler's
Mechanical Drawing[:] Standards and Conventions,
Detroit, Michigan: Detroit Public Schools, 1916.
This is the third edition, of January 1921,
published in 1922.
Scanned in 2001.
A Library of Antiquarian Technology
